Oud-Heverlee Leuven (w), commonly known as OL Leuven (w), is a prominent women’s football team based in Leuven, Belgium. Competing in the Belgian Women’s First Division A, the team is renowned for its strategic gameplay and dynamic squad. Founded in 2007, OL Leuven (w) has quickly established itself as a formidable force in Belgian women’s football.
Since its inception, Oud-Heverlee Leuven (w) has experienced significant growth. The team has consistently performed well in the league, with notable seasons that have seen them secure top positions. They have won several league titles and have been runners-up on multiple occasions. Their journey includes memorable matches that have contributed to their rising reputation.
The current squad of OL Leuven (w) boasts a mix of experienced players and promising talents. Key players include:
Oud-Heverlee Leuven (w) employs a 4-3-3 formation, focusing on strong midfield control and quick transitions to attack. Their strategy emphasizes teamwork and fluid movement, allowing them to exploit spaces effectively. Strengths include their tactical discipline and offensive creativity, while weaknesses may arise from occasional lapses in defense.
The team is affectionately nicknamed “OL Ladies” by their fans. Known for their passionate fanbase, OL Leuven (w) has a rich tradition of community engagement and rivalry matches that are highly anticipated events. Their most notable rival is Standard Liège (w), with whom they share intense competition.
In comparison to other teams in the Belgian Women’s First Division A, OL Leuven (w) stands out for its balanced approach between defense and attack. While teams like Anderlecht (w) focus heavily on offensive strategies, OL Leuven (w) maintains a more holistic approach that often gives them an edge in crucial matches.
A breakthrough game for OL Leuven (w) was their victory against Genk (w) in the 2019 season, which marked a turning point in their campaign. This match showcased their tactical maturity and ability to perform under pressure.
| Statistic |
Oud-Heverlee Leuven (w) |
Average League Statistic |
| Total Goals Scored This Season |
45 |
38 |
| Total Goals Conceded This Season |
22 |
30 |
| Last Five Match Results |
W-W-D-L-W |
N/A |
| Odds for Next Match Win/Loss/Draw* |
1.75/3.50/3.00* |
*
(*Odds subject to change)
*
“The world is not fair.”
I am wondering what does **world** mean here? Is it referring to **human society**, **the whole earth**, or something else?
# answer
In this context *world* means “life”. It would be similar to saying “Life isn’t fair.”
:** No.
* **Is there any possibility of obtaining it?** : Yes.
**Q5 : Are you sure about your decision?**
* **Yes** : Go to Q6.
* **No** : Go back to Q1.
**Q6 : Do you want any more information about these options?**
* **Yes** : Go back to Q1.
* **No** : Finish.
* P + 0x80;
break;
case 0x81:
EAX = * P + *(P + 1);
break;
case 0x82:
EAX = * P + *(P + 1);
break;
case 0x83:
EAX = * P + *(P + 1);
break;
case 0x84:
EAX = * P & *(P + 1);
break;
case 0x85:
EAX = * P | *(P + 1);
break;
case 0x86:
EAX = * P ^ *(P + 1);
break;
case 0x87:
EAX = *(P + 1) < sizeof(EAX)*8 )
CL %= sizeof(EAX)*8;
EAX >>= CL;
break;
case 0x88:
EAX = *(P+1);
/* signed right shift */
if( CL > sizeof(EAX)*8 )
CL %= sizeof(EAX)*8;
if( SHRD )
SHRD( &(EAX), &(EAX), CL );
else
SAR( &(EAX), CL );
break;
case 0x89:
MOV( &(EAX), P );
break;
case OP_SHLD: /* only used when SSE disabled */
SHLD(&(EAX),(unsigned int *)(ESI+DI),(unsigned char)(CL));
break;
default :
assert(!”invalid opcode”);
return FALSE;
}
#ifdef DEBUG_PRINT_INSTRUCTIONS
if (!silent)
{
printf(“op=%02X”, op);
switch(op)
{
case OP_ADD_EbGv: printf(” ADD Eb,Gv”);break;
case OP_OR_EbGv: printf(” OR Eb,Gv”);break;
case OP_ADC_EbGv: printf(” ADC Eb,Gv”);break;
case OP_SBB_EbGv: printf(” SBB Eb,Gv”);break;
case OP_AND_EbGv: printf(” AND Eb,Gv”);break;
case OP_SUB_EbGv: printf(” SUB Eb,Gv”);break;
case OP_XOR_EbGv: printf(” XOR Eb,Gv”);break;
case OP_CMP_EbGv: printf(” CMP Eb,Gv”);break;
case OP_ADD_GvEb: printf(” ADD Gv,Eb”);break;
case OP_OR_GvEb: printf(” OR Gv,Eb”);break;
case OP_ADC_GvEb: printf(” ADC Gv,Eb”);break;
case OP_SBB_GvEb: printf(” SBB Gv,Eb”);break;
case OP_AND_GvEb: printf(” AND Gv,Eb”);break;
case OP_SUB_GvEb: printf(” SUB Gv,Eb”);break;
case OP_XOR_GvbEb: printf(” XOR Gvb,Eb”);break;
case OP_CMP_GvbEb: printf(” CMP Gvb,Eb”);break;
default :
printf(“%02X”, op);
}
printf(“n”);
}
#endif
return TRUE;
}
void Emulator::ExecuteOneInstruction()
{
unsigned char op;
op=*(unsigned char*)IP++;
if (!ExecuteInstruction(&op)) {
#ifdef DEBUG_PRINT_INSTRUCTIONS
printf(“*** Error executing instructionn”);
#endif
return ;
}
}
void Emulator::SetSSEState(bool enabled)
{
sse_enabled=enabled;
}
bool Emulator::GetSSEState()
{
return sse_enabled;
}
copperbox/goldfish<|file_sep#!/bin/bash
#
# Copyright(c) Intel Corporation.
# All rights reserved.
#
# Redistribution and use in source form are permitted provided that the above copyright notice,
# this paragraph and the following disclaimer are duplicated in all such forms.
#
# Redistribution and use in binary form are permitted provided that the above copyright notice,
# this paragraph and the following disclaimer are duplicated in all such forms
# AND THAT ANY DISTRIBUTION INCLUDES THE ORIGINAL LICENSE THIS FILE.
#
# THIS SOFTWARE IS PROVIDED “AS IS'' AND WITH ALL FAULTS.
# NO WARRANTIES AS TO PERFORMANCE OR MERCHANTABILITY OR ANY OTHER TRADEMARK RIGHTS CAN BE EXPRESSLY MADE.
#
if [ "$#" != "4" ]; then
echo "usage:"
echo "$0 device_path path_to_libvirt_server port_to_libvirt_server domain_id"
exit -1
fi
device_path=$1
libvirt_server=$2:$3
domain_id=$4
echo "Starting libvirsh"
libvirsh –connect qemu+ssh://root@${libvirt_server} system-shutdown ${domain_id} &
sleep .5
while [ "$(cat /proc/$$/fdinfo/* | grep "${device_path}")" != "" ]; do sleep .5 ; done
echo "Libvirsh exited"
wait $!
exit $?
<|file_sep[Action]
ActionName=CopyFileToRemoteHostViaSCP
[Parameters]
SourceFile=@Parameter:String@
DestinationPath=@Parameter:String@
Host=@Parameter:String@
[Description]
Description=Copy file specified by SourceFile parameter using scp protocol to remote host specified by Host parameter at destination path DestinationPath.
[Icon]
IconFile=CopyFileToRemoteHostViaSCP.png
[Dependencies]
Dependency_0=scp.exe
<|file_sep `timescale 1ns /100ps
module tb_dram_256M_16bit (
input clk,
input rst_n,
output dram_clk,
output dram_clk_n,
output [12:0] dram_addr,
output [15:0] dram_dq_msb,
inout [15:0] dram_dq_lsb,
output cas_n,
output ras_n,
output cs_n,
output web,
input read_strobe_i,
input stall_i,
input write_strobe_i,
input read_request_i,
input [11:0] read_address_i,
input [15:0] write_data_i,
input init_done_i,
output reg init_done_o,
output reg data_valid_o,
output reg [15 : 0] read_data_o
);
reg init_done_r;
reg reset_n_r;
reg reset_done_r;
wire cas_n_w;
wire ras_n_w;
wire cs_n_w;
wire web_w;
wire [12 : 0] addr_r_w;
wire [15 : 0] data_r_w;
assign init_done_o = init_done_r;
always @(posedge clk or negedge rst_n)
begin
if (~rst_n)
begin
reset_n_r <= #`DELAY_TIME 'd0;
end
else
begin
reset_n_r <= #`DELAY_TIME 'd1;
end
end
always @(posedge clk or negedge rst_n)
begin
if (~rst_n)
begin
reset_done_r <= #`DELAY_TIME 'd0;
end
else
begin
reset_done_r <= #`DELAY_TIME init_done_i;
end
end
always @(posedge clk or negedge rst_n)
begin
if (~rst_n)
begin
init_done_r <= #`DELAY_TIME 'd0;
end
else
begin
if (~init_done_i && reset_done_r)
init_done_r <= #`DELAY_TIME 'd1;
end
end
// DUT instantiation
DRAM_DUAL_PORT_256M dram (
.clk(clk),
.reset(~reset_n_r),
.dram_clk(dram_clk),
.dram_clk_b(dram_clk),
.dq(dram_dq_msb),
.dq_b(dram_dq_lsb),
.cas(cas_n_w),
.ras(ras_n_w),
.cs(cs_n_w),
.we(web_w),
.addr(addr_r_w),
.data(data_r_w)
);
assign cas_n = cas_n_w;
assign ras_n = ras_n_w;
assign cs_n = cs_n_w;
assign web = web_w;
// address generation logic
reg [12 : 0] addr_reg ;
always @(posedge clk or negedge rstn)
begin
if (!rstn)
begin
addr_reg <= #`DELAY_TIME {13{1'bX}};
end
else
begin
if (!stall_i && !init_done_o && !read_request_i)
addr_reg <= #`DELAY_TIME {13{read_address_i}} << `SHIFT_BITS ;
else if (!stall_i && read_request_i && !write_strobe_i && !init_done_o)
addr_reg <= #`DELAY_TIME addr_reg << `SHIFT_BITS ;
else if (!stall_i && write_strobe_i && !read_request_i && !init_done_o)
addr_reg > `SHIFT_BITS ;
else
addr_reg <= #`DELAY_TIME addr_reg ;
end
assign addr_r_w = addr_reg ;
// data write logic
reg [15 : 0] write_data_q ;
always @(posedge clk or negedge rstn)
begin
if (!rstn)
begin
write_data_q <= #`DELAY_TIME {16{1'bX}};
end
else
begin
if (!stall_i && write_strobe_i )
write_data_q <= #`DELAY_TIME write_data_i ;
else
write_data_q <= #`DELAY_TIME write_data_q ;
end
assign dram_dq_lsb ={16{write_strobe_i}} & write_data_q ;
// data read logic
always @(posedge clk or negedge rstn)
begin
if (!rstn)
begin
read_data_o<= #`DELAY_TIME {16{1'bX}};
data_valid_o<= #`DELAY_TIME 'dX;
end
else
begin
if (!stall_i && read_strobe_i )
data_valid_o<= #`DELAY_TIME 'd1 ;
read_data_o<= #`DELAY_TIME data_r_w ;
else if (!stall_i)
data_valid_o<= #'DLY 'dX ;
read_data_o<= #'DLY {16{data_valid_o}} ;
else
data_valid_o<= #'DLY data_valid_o ;
read_data_o<= #'DLY read_data_o ;
end
endmodule // tb_dram_256M_16bit
copperbox/goldfish#ifndef __ARM7TDMI_H__
#define __ARM7TDMI_H__
#include “../cpu.h”
#include “../emulator.h”
#include “../arm_common.h”
#include “../arm_mem.h”
#include “../arm_opcodes.h”
class ARM7TDMI_CPU {
public:
static void reset(void);
static void step();
static void dump_state(FILE* f);
static void dump_regs(FILE* f);
static void dump_stack(FILE* f);
static bool load_binary(const char * filename);
static bool load_ram_image(const char * filename);
static bool save_ram_image(const char * filename);
private:
};
#endif // __ARM7TDMI_H__
copperbox/goldfish<|file_sep俄语：
http://www.windows7rus.com/download.php?id=38667&cid=27&name=Windows%207%20Ultimate%20Russian%20Update%20340-x86-x64-%20by%20ESET%20NOD32%20Antivirus&hash=a77e93f53fbb37a6e279c419a71ee19a&source=russoft.net&version=vista64&lang=en_us&sponsor=
日语：
http://www.windows7japan.com/download.php?id=38667&cid=27&name=Windows%207%20Ultimate%20Japanese%20Update%20340-x86-x64-%20by%20ESET%20NOD32%20Antivirus&hash=b167fb9aaeae96acfa783aafdc5fcfe9&source=japansoft.net&version=vista64&lang=en_us&sponsor=
韩语：
http://www.windows7korea.com/download.php?id=38667&cid=27&name=Windows%207%20Ultimate%20Korean%20Update%20340-x86-x64-%20by%20ESET%20NOD32%20Antivirus&hash=e6abcbdb4f57979e13248f6c49bb0148&source=koreansoft.net&version=vista64&lang=en_us&sponsor=
法语：
http://www.windows7france.com/download.php?id=38667&cid=27&name=Windows%207%20Ultimate,%202008R2,%20340-update,%2064-bit,%202008R3,%202012R5,%202013R10-%20408-Bit-Full-%28cleaned-by-ESET-NOD32-Antivirus%)__by__ESET_NOD32_Antivirus)&hash=fce73fd91ea92652be9129df03c8ffef&source=russiantorrents.net&id_lang=en_us&sponsor=
西班牙语：
http://www.windows7spain.com/download.php?id=38667&cid=27&name=ESET_NOD32_Antivirus)%29_Windows_7_Ultimate_Update_340_x86_x64_(Cleaned_by__ESET_NOD32_Antivirus)&hash=c97869da30a338ff71fa04ebf55dc76f&id_lang=en_us&sponsor=&version=vista64&
波兰语：
http://www.windows7poland.com/download.php?id=38667&id_lang=en_us&sponsor=&version=vista64&
葡萄牙语：
http://www.windows7portugal.com/download.php?id=38667&id_lang=en_us&sponsor=&version=vista64&
意大利语：
http://www.windows7italy.com/download.php?id=38667&id_lang=en_us&sponsor=&version=vista64&
繁体中文（台湾）：
http://www.windows7taiwan.com/download.php?id=38667&id_lang=en_us&sponsor=&version=vista64&
简体中文（中国）：暂无，因为微软在中国的服务器被封锁，所以下载速度很慢。
英文版：不需要下载，直接使用原版ISO即可。
其他语言：暂无。不过，如果你有其他语言的ISO可以发给我。
网盘链接：
百度云盘（限制每天下载三次）
链接：https://pan.baidu.com/s/18U4B9ZlYz6CmLQoVHg98Lg 密码：ggkk
迅雷BT种子地址：
用于验证的winpe镜像可以从此处获取：
https://mega.co.nz/#F!tEdiTCyB!TEtpBjWlKoJZLJevlwyFSA（大小为141MB）
或者从这里获取：
https://mega.nz/#F!tEdiTCyB!TEtpBjWlKoJZLJevlwyFSA（大小为141MB）
如何使用WinPE镜像？
解压缩到一个文件夹内，并将其挂载到虚拟机上。
在虚拟机中启动，并选择该镜像作为启动设备。
在WinPE界面中运行setup.exe来安装GoldFish OS。
注意事项：
如果在安装过程中出现错误，请确保你的虚拟机的主板设置是“Legacy”模式，而不是“UEFI”。
如果还是出错，请参考此教程进行操作：
https://docs.google.com/document/d/14UVexdrJyxQ61fgCzFKmDyhA3W-GIjAcFutYuYjUzCg/edit?usp=sheets_home&；hl；zh-CN；authuser＝０ （请使用谷歌浏览器打开）
注意事项二：
如果你想自定义启动菜单，请按照此教程进行操作：
https://docs.google.com/document/d/14UVexdrJyxQ61fgCzFKmDyhA3W-GIjAcFutYuYjUzCg/edit?usp=sheets_home&；hl；zh-CN；authuser＝０ （请使用谷歌浏览器打开）
注意事项三：
如果你想自定义桌面壁纸，请按照此教程进行操作：
https://docs.google.com/document/d/14UVexdrJyxQ61fgCzFKmDyhA3W-GIjAcFutYuYjUzCg/edit?usp=sheets_home&；hl；zh-CN；authuser＝０ （请使用谷歌浏览器打开）
注意事项四：
如果你想修改桌面壁纸，在运行GoldFish OS之前必须要执行以下命令行程序才能使更改生效。否则更改不会生效。
cmd.exe /c copy %windir%explorer.exe %windir%explorer.bak & copy explorer.exe %windir%explorer.exe & exit /B
命令行程序运行完毕后，重启电脑即可看到更改生效。
注意事项五：
如果你想添加新功能或者修改已有功能，请按照此教程进行操作：
https://docs.google.com/document/d/14UVexdrJyxQ61fgCzFKmDyhA3W-GIjAcFutYuYjUzCg/edit?usp=sheets_home&；hl；zh-CN；authuser＝０ （请使用谷歌浏览器打开）
